Fill out the form with your application and requirements and we will find the right product for your needs or continue scrolling for the Product Catalog.
NEW FormLabs Form 4L - BIG Parts, Blazing Fast. Order Yours Today!
Want to learn more about the products we provide?
A wheel loader is an extremely flexible and special machine to control as they are used in excavation work, but also material overhaul and even fine grading.
Features & Benefits:
- Eliminate over excavation.
- Intuitive interface.
- Dedicated machine builder.
Now you can experience the benefits of Topcon’s GPS+ grade control in your wheel loader. This new system combines the advantages of our industry leading GPS/GLONASS technology together with our industry standard operator interface. You’ll eliminate over excavation and control material usage saving you time and money.
This system gets you to grade faster, and keeps you there, even in deep, blind cut situations or when digging under water. The Graphical Display allows the operator to “see” the machines exact position on the site, and the buckets position at all times. The Wheel Loader system for 3D machine control applications. When used with the two Topcon GNSS Antennas and the MC-R3 Controller to provide positioning and heading information, the three tilt sensors accurately measure the gravity-referenced angles of the wheel loader’s body, boom, and bucket, sending this data to the GX-60 Display to provide precise 3D grade control. Each sensor is configured and calibrated for its specific location on the wheel loader.
Read More
- Technical Specifications
-
Machine Control - Receiver 3 ( MC-R3 ) Electrical Specifications
- Supply Voltage: 10-30 VDC
- Supply Current: 3A typical operating current 18.5A
- Emmissions: Applicable regulation: EN55022: 2006
- Immunity: Applicable regulation: EN55024: 1998
- Output Power: 10A max for sensors 8A max
- Ports: 1 ea. Topcon proprietary RS-485 port
Machine Control - Receiver 3 ( MC-R3 ) Physical Specifications
- Housing: Powder-coated, cast aluminum
- Connectors: 2 ea. DRC23-40P Deutsch high density
- Switches: Logic control: Hi = On, Low = Off
- LEDs: CAN, Sensor, Controller, Auto
- Cooling: Internal Fan
- Weight: 7.5 lbs
Machine Control - Receiver 3 ( MC-R3 ) Environmental Specs
- Operating Temperature: -20°C to +60°C
- Ingress Protection: IP-66
- Shock Rating: 50G 11ms 1/2 sine wave each axis
- Salt Spray Test: MIL-STD 810F
- Vibration Rating: 10-400Hz sweep 5G RMS
9169 ( GX-60 ) Specifications (Electrical)
- Supply Voltage: 10-30VDC
- Supply Current: 3A Typical operating current
- Switched Output Power: 5A Sensor/Conditioned output power
- Ports: USB (2), RS-485, RS-232 and CAN(2)
9169 ( GX-60 ) Specifications (Physical)
- Display Panel: 640x480 Color VGA
- Housing: Cast aluminum
- Audio: 1ea environmentally sealed speaker
- Switches: 2 ea momentary pushbutton
- Connectors: 2 ea 19 socket MIL-C-5015
- Cooling: 1ea internal processor fan
- Weight: 6 lbs.
9169 ( GX-60 ) Specifications (Environmental)
- Operating Temperature: -20°C to +60°C
- Humidity: Mil Std 810D, method 506
- Shock Rating: 50G 11ms 1?2 sine wave each axis
- Vibration Rating: 10-400Hz sweep 5G, 1 oct/min
- Salt Fog Test: 48 Hours (ASTM B117-97)
TS-1 Tilt Sensor Electrical Specifications
- Resolution: 0.01 Degree
- Protocol: CAN-Open
- Supply Voltage: 10-30 VDC
TS-1 Tilt Sensor Physical Specifications
- Sensor: Solid state, 3-axis, 360°
- Housing: Powder-coated aluminum
- Connectors: 2 ea. M12
- Weight: 1.7 lbs.
TS-1 Tilt Sensor Environmental Specifications
- Operating Temperature: -20°C to +60°C
- Ingress Protection: IP 67
-