Fill out the form with your application and requirements and we will find the right product for your needs or continue scrolling for the Product Catalog.
NEW FormLabs Form 4L - BIG Parts, Blazing Fast. Order Yours Today!
Want to learn more about the products we provide?
Adding Topcon's 3D-GPS+ System to a Compactor Greatly Enhances Productivity on a Daily Basis.
Features & Benefits:
- Rugged color touch screen control box displays blade position and distance to design.
- Real-time cut/fill mapping.
- Backwards compatible with existing Topcon MC systems.
- Increase compaction productivity significantly.
- Complete compaction rates on time or ahead of schedule.
- Easy to use software for all your operators.
Automatic Grade Control
For site work, contour grading, or any other complex surface grading requirements, Topcon’s 3D-GPS+ will put more money to your bottom line where it counts. With the reality of providing unmatched material control capability, and the simplest user interface in the industry, you are sure to integrate Topcon 3D technology successfully into your business.
We make sure the investment you make today will work for you in the future. Topcon’s building block design allows you to add new sensors or technologies to your system such Networks as they become available without having to buy a whole new system.
Topcon's 3D GPS+ system has the ability to track both GPS and GLONASS.
This fully automated machine control solution gets you to finish grade and virtually eliminates grade stakes, to give you ultimate control and save time on the job.
Fully backwards compatible with other Topccon machine control systems, 3D GPS+ can also be used in combination with other grade sensors such as Sonic Trackers, slope sensors and laser receivers.
Read More
- Technical Specifications
-
MC-R3 Electrical Specifications
- Supply Voltage: 10-30 VDC
- Supply Current: 3A typical operating current 18.5A
- Emmissions: Applicable regulation: EN55022
- Immunity: Applicable regulation: EN55024
- Output Power: 10A max for sensors 8A max
- Ports: 2 ea. CAN ports 2 ea. Ethernet ports
MC-R3 Physical Specifications
- Housing: Powder-coated, cast aluminum
- Connectors: 2 ea. DRC23-40P Deutsch connector
- Switches: Logic control: Hi = On, Low = Off
- LEDs: CAN, Sensor, Controller, Radio Modem
- Cooling: Internal Fan
- Weight: 7.5 lbs
MC-R3 Environmental Specifications
- Operating Temperature: -20°C to +60°C
- Ingress Protection: IP-66
- Shock Rating: 50G 11ms 1/2 sine wave
- Salt Spray Test: MIL-STD 810F
- Vibration Rating: 10-400Hz sweep 5G RMS
9169 ( GX-60 ) Electrical Specifications
- Supply Voltage: 10-30VDC
- Supply Current: 3A Typical operating current
- Switched O/P Power: 5A Sensor/Conditioned output power
- Ports: USB (2), RS-485, RS-232, CAN(2)
9169 ( GX-60 ) Physical Specifications
- Display Panel: 640x480 Color VGA
- Housing: Cast aluminum
- Audio: 1ea environmentally sealed speaker
- Switches: 2 ea momentary pushbutton
- Connectors: 2 ea 19 socket MIL-C-5015
- Cooling: 1ea internal processor fan
- Weight: 6 lbs.
9169 ( GX-60 ) Environmental Specifications
- Operating Temperature: -20°C to +60°C
- Humidity: Mil Std 810D, method 506
- Shock Rating: 50G 11ms sine wave each axis
- Vibration Rating: 10-400Hz sweep 5G, 1 oct/min
- Salt Fog Test: 48 Hours (ASTM B117-97)
Topcon MC-A1 Electrical Specifications
- Supply Voltage: 2.7 - 12 VDC
Topcon MC-A1 Physical Specifications
- Antenna Type: PG-A3 element
- Housing: Aluminum ground plane, Plastic dome
- Connectors: 1ea. N Female
- Weight: 1.9 lbs
Topcon MC-A1 Environmental Specifications
- Operating Temperature: -20°C to + 60°C
- Shock Rating: 20G 11ms 50 cycles 1Hz
- Vibration Rating: 2-250 Hz sweep 8G, 1oct/min
MAGNET Office Software Product Specifications
- Operating System: Microsoft Windows XP,Vista, 7 & 8
- Processor Speed: 2GHz Core2 processor or higher
- RAM: 2GB RAM
- Memory: 512 MB (1.0 GB recommended)
- Ports: USB2 port for USB key
- Computer Resolution: 1280x1024 display resolution
-