Accuracy, range, resolution and scanning speed are usually among the first things compared when choosing a 3D laser scanner. And rightly so. These specifications establish what a system is capable of and help narrow the options.
But they don't always tell you how well a scanner will suit the work you're doing.
A system that performs well on a large outdoor survey may not be the most practical choice for documenting a complex building. Even within the same project, different measurement requirements can call for different scanning approaches.
For surveying, construction and reality capture professionals, choosing the right equipment means looking at how technical capabilities translate into results on site and throughout the workflow.
Here are six considerations worth examining before making that decision.
Before comparing scanners, establish what the captured information needs to achieve.
An as-built survey, construction progress documentation and an engineering assessment may all involve capturing existing conditions. But they don't necessarily require the same level of detail, measurement confidence or final deliverables.
Consider an industrial facility undergoing modifications.
A team documenting the overall arrangement of equipment and pipework may prioritise efficient coverage and a reliable spatial record.
If the same project involves designing new connections to existing infrastructure, specific interfaces and dimensions may require closer attention and additional verification.
The environment hasn't changed, but the intended use of the data has.
That distinction can influence the scanning approach, survey control, capture planning and any supplementary measurements required.
Start with the decisions the data needs to support, then evaluate the equipment against those requirements.
Accuracy is essential in reality capture, but not all published figures describe the same thing.
Manufacturers may specify ranging accuracy, 3D position accuracy, precision and resolution. These measure different aspects of scanner performance and shouldn't be treated as interchangeable.
For example, higher point density can capture finer surface detail, but it doesn't automatically mean more accurate measurements.
There's also a difference between a scanner's published measurement performance and the accuracy of a completed dataset.
Scanner positioning, registration and survey control influence the accuracy of the completed dataset. Independent checks help establish whether the result meets the project's requirements.
For projects requiring georeferenced data, it's also important to consider how the point cloud will be positioned within the required coordinate system. A well-registered dataset isn't necessarily correctly referenced to the project's survey control.
When evaluating a system, consider what the published figures represent, the conditions under which they apply and how the required accuracy will be achieved across the project.
The aim isn't necessarily to select the scanner with the highest published accuracy. It's to choose equipment and a measurement methodology that can reliably meet the project's requirements.
Maximum range and scanning speed are useful comparison points, but actual site conditions often determine how practical a system will be.
A congested plant room, an active construction site and an open mining operation present very different challenges.
In industrial facilities, pipework, equipment and structural elements can obstruct sightlines. Terrestrial scanning may require multiple positions to achieve sufficient coverage, while mobile scanning can offer advantages when moving through complex spaces.
On construction sites, access restrictions and the frequency of capture may influence the choice of equipment. For large outdoor surveys, working distance, terrain, surface characteristics and environmental conditions become more significant.
These differences help explain why terrestrial, mobile and long-range scanning technologies each have a place in reality capture.
Rather than focusing on a single maximum range or speed figure, consider how consistently the scanner can capture the required information under your actual working conditions.
Not necessarily. Faster data capture can reduce time on site, but overall project efficiency also depends on processing, registration, verification and the requirements of the final deliverable.
Consider a team documenting an existing multi-storey building.
A mobile scanning system may allow an operator to move through rooms and corridors efficiently, reducing time on site.
A terrestrial workflow may involve more individual setups, but could be better suited to areas with different measurement or detail requirements.
The relevant comparison isn't simply how long each system takes to scan the building. It's how much work is required to produce a deliverable that meets the project's needs.
For some projects, combining capture approaches may be more effective than using one system for every area.
Compare the complete workflow
A representative project or demonstration can help establish how different systems perform across the stages that matter.
| What to evaluate | What to look for |
|---|---|
| Site setup and capture | Time required, access limitations and coverage |
| Processing and registration | Steps and effort needed to prepare the dataset |
| Data quality | Whether the results meet the required accuracy and detail |
| Final deliverable | Whether the output is suitable for its intended use |
| Operator experience | How practical the system is for the team |
A scanner that reduces field time may offer substantial value, but that advantage needs to be considered alongside the work required after capture.
The real productivity measure is the time and effort needed to turn captured data into a usable result.
A point cloud is often an intermediate output rather than the final deliverable.
Depending on the application, captured data may support as-built documentation, CAD drawings, BIM modelling, engineering design, site analysis or infrastructure surveys.
Each places different demands on the data and the software used to process it.
For example, a construction team creating an as-built BIM model needs to consider how point cloud data will be processed and referenced within its modelling environment.
A survey team working on infrastructure may have different requirements for point cloud processing, survey outputs and data delivery.
File compatibility is important, but the ability to export a particular format doesn't guarantee that the complete workflow will be straightforward.
Before investing, check how data will be registered, processed, verified and transferred into the systems your team already uses.
It's also worth distinguishing between supplying a point cloud and producing a finished CAD or BIM model. These are different deliverables with different processing requirements.
Testing a representative dataset through your existing software can reveal practical limitations before they become project issues.
A 3D scanner is a significant investment, and its value depends on more than the equipment itself.
Software licensing, training, servicing and ongoing technical assistance influence the total cost of ownership and how effectively a system can be used over time.
This is particularly relevant when a team is adopting a new scanning approach or taking on applications outside its usual work.
Access to knowledgeable local specialists can make a difference during the selection process.
An applications specialist who understands your project requirements can help assess suitable technologies, explain the practical implications of different workflows and arrange demonstrations that reflect the work you actually undertake.
A useful demonstration should allow you to evaluate more than the scanner's features. It should also give you an opportunity to assess the captured data, processing requirements and suitability of the final output.
That same expertise remains valuable after purchase, whether the team needs operator training, software guidance or assistance with an unfamiliar application.
For organisations with occasional scanning requirements, equipment hire may also be worth considering alongside purchase.
The goal is to invest in a system that not only meets the technical requirements, but can be used confidently and effectively throughout its working life.
Specifications are essential when evaluating a 3D laser scanner. But they become most useful when considered in the context of the work being undertaken.
A practical demonstration using a representative application, including the intended data output, can often reveal more than comparing specifications alone.
At Synergy Group, we work with FARO and RIEGL reality capture technologies, helping customers across Australia and New Zealand evaluate scanning solutions for surveying, construction and infrastructure applications.
Whether you're investing in a new system, expanding your capabilities or reviewing existing equipment, our local specialists can help you assess the available options against your requirements.
Talk to the Synergy team about your scanning application.